Stager Ribbon Microphones Nashville

With feet in the past and a brain in the future, the Stager SR-1A is a mammoth ribbon mic with some of the biggest, truest bottom-end you could hope to hear from a ribbon, condenser or anything else! The SR-1A houses massive Alnico-V magnets around a long ribbon in a precision machined aluminum housing. The output transformer, also made by Stager Microphones, is a toroidal design that's responsible for the deep bass, open, lulling top-end and depth of field.

• Dual Alnico-V horseshoe magnets
• Toroidal Transformer designed and made by Stager Microphones
• Purely Passive Design
• 2.5 micron ribbon thickness
• Ribbon Dimensions - 2" X 0.2"
• Laser cut pole pieces
• Precision machined aluminum, brass and steel construction
• Weight 5lb
• MADE IN Nashville, TN

SR-2N

NeoDymium Ribbon Microphone

$649

Buy Now

While weighing in at under one pound, the SR-2N crams an inordinate amount of size into the sound of your tracks. Employing the same ribbon and toroidal output transformer as the company's flagship model SR-1A, the Stager SR-2N swaps out the large alnico magnets with a more contemporary neodymium motor, while simplifying the housing and mount to put heavyweight punch into a featherweight fighter.

Incredible low-frequency pickup and a neutral midrange set the stage for a very gentle high-frequency roll off that's inherent to classic ribbons -- but the SR-2N miraculously loses no transient detail, and beautifully flatters percussive material and bright sound sources in a way that won't make you feel like you're missing anything by skipping the EQ.

Stick one up close on the smaller speaker of an old tube combo for tremendous low-end emphasis, back up a pair to capture drums with a three-dimensional quality, or...jeez...just leave the thing on a stand and point it at anything that makes sound, then stretch out a big ol' smile when you listen to playback.

• Neodymium Magnets
• Passive yet high output design
• Toroidal Transformer designed and made by Stager Microphones
• Weight - 14oz.
• Polar Pattern - Figure Eight
• Ribbon Dimensions - 2" X 0.25"
• 1.8 micron ribbon thickness
• Stereo Shock Mount included with matched pairs
• MADE IN USA

Using the same ribbon, magnet, and transformer as the standard mic, the Stereo SR-2N gives you double the pleasure in a permanently-fixed stereo orientation offering up Blumlein or Mid-Side recording in a sleek, single-point microphone. Stager's Stereo SR-2N allows you to effortlessly capture the true stereo image of a piano, drum set, string section, horn ensemble, vocal group, or all of them at once with a certain "aural umami" that must be heard to be tasted.

• 2" x 0.25" 1.8-Micron Ribbon x2 in crossed figure-of eight configuration
• Neodymium Magnets
• Proprietary Toroidal Transformers
• High Output Passive Design
• Sensitivity -46dbV
• Shockmount included
• Mogami Breakout cable included
• Easily Record in Blumlein Stereo or Mid-Side Stereo
• 1.33 lbs

The Stager SR-3 brings together the best qualities of the SR-2N and SR-1A for more output, flatter frequency response, tighter low end and extended high end. Perfect for capturing vocals or acoustic instruments. This mic is no slouch on guitar and bass amplifiers either! Employing the longest ribbon Stager Microphones has to offer, the SR-3 will produce a huge sound stage with anything you put in front of it!

• Neodymium Magnets
•
• Internal Shockmount Iso System
• Passive, high output design
• Toroidal Transformer designed and made by Stager Microphones
• Weight - 30oz.
• Polar Pattern - Figure Eight
• Ribbon Dimensions - 3” X 0.25"
• 1.8 micron ribbon thickness
•
• Matched Pairs available
• Free shipping to continental U.S.
• MADE IN USA

Designed for, but not limited to, guitar and vocals, the SR-5 finds itself at home on practically every source. Utilizing the exact same proprietary toroidal transformer as found in the SR-1A and SR-2N.

• Hyper Cardioid Polar Patern
• NeoDymium Magnets
• Passive
• Stager Toroidal Transformer
• Yoke Mount
• Weight 20oz
• Ribbon Dimensions - 0.1" x 1"
• Ribbon Thickness - 1.8u
• Ribbon Material - Corrugated Aluminum

SR-66

NeoDymium

Long Ribbon Microphone

$699

Buy Now

Delivering long ribbon sound in an affordable package, the SR-66 is the latest from Stager Microphones.

The SR-66 touts a 3 inch long by 1/4 inch wide corrugated aluminum ribbon framed with NeoDymium motor construction and stepped up by a proprietary 1:32 toroidal transformer. This purely passive design effortlessly captures transients and detail with extraordinary realism. The SR-66 excels mid to near field on sources from overheads to vocals. Machined in USA and made in Nashville, TN the SR-66 is easily positioned by a robust K&M microphone clip and housed for safe keeping in a foam lined wooden box. Tight low end with minimal proximity effect, relaxed mid range and detailed top end make the SR-66 a valuable addition to every mic locker.

• -50dBV/Pa
• NeoDymium Magnets
• Toroidal Transformer designed and manufactured by Stager Microphones
• Purely Passive
• 8.9 Oz
• Figure 8
• 3" x .23" corrugated aluminum ribbon
• Machined in USA made in Nashville, TN

SR-1A

Alnico-V Ribbon Microphone

$1999

SR-2N

NeoDymium Ribbon Microphone

$649

SR-2N Matched Pair

$1299

Stereo SR-2N

$1299

SR-3

NeoDymium

Long Ribbon Microphone

$1499

SR-5

Directional Ribbon Microphone

$799

Designed for, but not limited to, guitar and vocals, the SR-5 finds itself at home on practically every source. Utilizing the exact same proprietary toroidal transformer as found in the SR-1A and SR-2N.

SR-66

NeoDymium

Long Ribbon Microphone

$699

Delivering long ribbon sound in an affordable package, the SR-66 is the latest from Stager Microphones.

Every Stager Microphone employs a custom toroidal transformer designed and wound by Stager,

designed to deliver the fullest frequency response and transients, making you sound better!

Stager Microphones and Transformers are hand made in NASHVILLE, TN

This website makes use of cookies. Please see our privacy policy for details.